tank.
[2]: When carrying, please act lightly and carefully so as to avoid collision with the small parts and the wall; if one person
can’t complete this operation independently, please deploy other persons to assist.
[3]: When knock-down shipping, be sure to well store all dismounted parts or screws for preventing loss.
[4]: After using the lifting rob, return it to the original place for next using.
Chapter IV
Equipment Wiring and Inverter Reset
Wiring the equipment, please be sure to operate strictly as per the following instruction, so as to prevent unnecessary loss.
4.1 Notices for Wiring
[1]: If there need self-wiring, it must be operated under the instruction of professional electricians or the technicians of the
manufacturer.
[2]: The electrical system of this equipment must strictly follow the parameters (voltage and frequency) designated on the
nameplate, and before being connected with the input power, please check and ensure the voltage and the frequency of the
external power supply are coincident.
[3]: This equipment must be connected to the power system equipped with grounded electrically for preventing the electric
shock of the operator.
Note: The power wire (380V) of this equipment is equipped with 3 main traverse wire, 1 ground wire and 1 null wire. Connect
the plug into appropriate power socket. The green-and-yellow core wire in the power wire is the ground wire, and don’t
connect the ground wire to non-power socket.
4.2 The general wiring diagram of switch box, inverter
and motor
To Next Page
Loading...
General