Toro 03780 - Mow Speed-Spacer Table; Adjusting Maximum Mow-Ground Speed

Mow Speed-Spacer Table
G425371
Adjusting Maximum Mow-Ground Speed
Adjusting the Mow Speed-Spacers
1. Prepare the machine for maintenance.
2. Use the Mow Speed-Spacer Table to determine the maximum ground speed when you
mow, and the position of the short spacers that limit mow-ground speed.
Note: Each short spacer adjusts the mowing speed by 0.8 km/h (0.5 mph).
3. Below the traction pedal, remove the stop bolt and flange locknut that secure the
spacers to the mow-stop block.
3466-702A Page 6–33 Maintenance: Drive System Maintenance