Maintenance
Service Interval
Maintenance Procedure Part No.
Qty Description
Visually inspect the reduction-
gear case for leaks.
- - -
Check the coolant level. - - -
Service the engine cooling
system (more frequently in
extremely dirty or dusty
conditions).
- - -
Inspect the hydraulic lines and
hoses.
- - -
Check the level of the hydraulic
fluid.
- - -
Every 50 hours
Grease the bearings and
bushings (and immediately after
every washing).
108-1190 1
Premium all-purpose grease (14
oz)
Clean the battery and check the
condition of it.
- - -
Every 100 hours Check the condition and tension
of the alternator belt.
127-2998 1 Alternator belt
Every 200 hours Torque the wheel nuts.
- - -
Every 400 hours
Service the air cleaner (more
frequently in extremely dirty or
dusty conditions). Service the air
cleaner earlier if the air-cleaner
indicator shows red.
108-3814 1 Outer air filter
108-3816 1 Inner air filter
Inspect the fuel lines and
connections.
- - -
Replace the fuel/water separator
filter.
125-2915 1
Fuel system water filter
Replace the engine fuel filter.
125-8752 1 Fuel filter
Check for end-play in the
planetary drives.
- - -
Check the planetary-gear-drive
oil level (check if you notice
external leakage).
- - -
Check the oil level of the rear
axle (and before you start the
engine for the first time).
- - -
Check the lubricant in the
reduction-gear case. (and before
you start the engine for the first
time).
- - -
Every 500 hours Change the engine oil and filter.
125-7025 1
Engine oil filter
Maintenance: Recommended Maintenance Schedule Page 6–2 3466-702 A
To Next Page
Loading...
