Toro 04540 - Jump-Starting the Machine; Drive System Maintenance; Checking the Tire Pressure; Checking the Torque of the Wheel Nuts

Jump-StartingtheMachine
Ifyouneedtojumpstartthemachine,youcanusethe
alternate-positivepost(locatedonthestartersolenoid)
insteadofthepositivebatterypost(Figure40).
g002735
Figure40
1.Alternate-positivepost
DriveSystem
Maintenance
CheckingtheTirePressure
ServiceInterval:Beforeeachuseordaily
Varythetirepressureforall3wheels,depending
uponyourturfconditions,fromaminimumof83toa
maximumof110kPa(12psito16psi).
CheckingtheTorqueofthe
WheelNuts
ServiceInterval:Afterthersthour
Aftertherst10hours
Every200hours
WARNING
Failuretomaintainpropertorqueofthewheel
nutscouldresultinpersonalinjury.
Torquethewheelnutstothespeciedtorque
atthespeciedintervals.
Wheelnuttorquespecication:95to122N∙m(70
to90ft-lb)
Note:Toensureevendistribution,torquethewheel
nutsinaXpattern.
AdjustingtheTransmission
forNeutral
Ifthemachinecreepswhenthetraction-controlpedal
isintheNEUTRALposition,adjusttheneutral-return
mechanism.
1.Ensurethatthebypassvalveisclosed.
2.Liftthemachineandsupportitattheframeso
that1ofthefrontwheelsisofftheoor.
Note:Ifthemachineisequippedwitha3-Wheel
DriveKit,alsoraiseandblocktherearwheel.
3.Starttheengine,movethethrottletotheSLOW
position,andensurethatthefrontwheelthatis
offtheoorisnotrotating.
4.Ifthewheelisrotating,shutofftheengineand
proceedasfollows:
A.Loosenthenutsecuringtheeccentrictothe
topofthehydrostat(Figure41).
42