Introduction
Thiscuttingunitisdesignedforcuttingturfongreensand
smallfairwaysofgolfcourses.
Readthisinformationcarefullytolearnhowtooperateand
maintainyourproductproperlyandtoavoidinjuryand
productdamage.Youareresponsibleforoperatingthe
productproperlyandsafely.
YoumaycontactTorodirectlyatwww .Toro.comforproduct
andaccessoryinformation,helpndingadealer,ortoregister
yourproduct.
Wheneveryouneedservice,genuineToroparts,oradditional
information,contactanAuthorizedServiceDealerorToro
CustomerServiceandhavethemodelandserialnumbersof
yourproductready.Figure1identiesthelocationofthe
modelandserialnumbersontheproduct.Writethenumbers
inthespaceprovided.
Figure1
1.Locationofthemodelandserialnumbers
ModelNo.
SerialNo.
Thismanualidentiespotentialhazardsandhassafety
messagesidentiedbythesafetyalertsymbol(Figure2),
whichsignalsahazardthatmaycauseseriousinjuryordeath
ifyoudonotfollowtherecommendedprecautions.
Figure2
1.Safetyalertsymbol
Thismanualuses2wordstohighlightinformation.
Importantcallsattentiontospecialmechanicalinformation
andNoteemphasizesgeneralinformationworthyofspecial
attention.
Contents
Introduction..................................................................2
Safety...........................................................................3
SafetyandInstructionalDecals.................................3
Setup............................................................................4
InstallingtheFrontRoller.........................................4
UsingtheCuttingUnitProp......................................4
AdjustingtheBedknifetotheReel.............................4
AdjustingtheRearRoller..........................................5
AdjustingtheHeightofCut......................................5
AdjustingtheCut-OffBar........................................7
ProductOverview..........................................................8
Specications.........................................................8
Attachments/Accessories.........................................8
Operation.....................................................................9
CuttingUnitCharacteristics......................................9
DailyAdjustmentsoftheCuttingUnit........................9
Maintenance.................................................................10
ServicingtheBedbar...............................................10
BacklappingtheReel...............................................11
©2014—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
2
Contactusatwww.Toro.com.
PrintedintheUSA.
AllRightsReserved