Toro 08720 User Manual

FormNo.3457-791RevA
SpeedLimiterKit
SandPro
®
2040ZTractionUnit
ModelNo.08720
InstallationInstructions
ThisproductcomplieswithallrelevantEuropean
directives.Fordetails,pleaseseetheDeclarationof
Incorporation(DOI)atthebackofthispublication.
WARNING
CALIFORNIA
Proposition65Warning
Useofthisproductmaycauseexposure
tochemicalsknowntotheStateof
Californiatocausecancer,birthdefects,
orotherreproductiveharm.
Safety
WARNING
Ifyoudrivethemachinewithoutanattachment
installed,itcantipoverandinjuresomeone
ordamageproperty.
Donotdrivethemachinewithouta
Toro-approvedattachmentinstalled.
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescription
Qty.
Use
Liftbracket(left-hand)
1
Liftbracket(right-hand)
1
1
Locknut(1/2inch)
2
Installtheliftbrackets.
Cable
2
Cambracket(left-hand)
1
2
Cambracket(right-hand)
1
Installthecablesontothecambrackets.
Cam
2
Socket-headcapscrew
2
Jamnut2
Flangebushing2
Spacer(3/8x17/32inch)
2
Bolt(3/8x1-1/4inch)
2
Fenderwasher(3/8inch)
4
3
Locknut(3/8inch)
2
Installthecams.
Bolt(5/16x3/4inch)
4
Flangenut(5/16inch)
4
4
Camspring
2
Installthecambrackets.
Cabletie
2
Bolt(5/16x3-1/2inch)
2
Frictionwasher4
Spacer(5/16x3/8inch)
2
Spacer(5/16x1inch)
2
5
Flangenut(5/16inch)
2
Routeandmountthecables.
©2022—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3457-791*

Toro 08720 Specifications

General

Brand	Toro
Model	08720
Category	Tractor Accessories
Language	English

Summary

Safety Information

Installation Guide

Installing the Lift Brackets

Mount the lift brackets to the machine frame using provided hardware.

Installing Cables to Cam Brackets

Attach cables securely to cam brackets with jam nuts and fittings.

Installing the Cams

Mount cams using cap screws, nuts, bushings, and spacers for operation.

Installing Cam Brackets

Align and fasten cam brackets to the frame with bolts and nuts.

Routing and Mounting Cables

Route and connect cables along the machine frame to the cam assembly.

Checking Attachment Lift Operation

Confirm correct function of lift and speed-limiter cables post-installation.

Adjusting Speed and Tracking

Calibrate speed limiter settings and ensure accurate machine tracking.

Installing Stop Plates

Reinstall stop plates in their original positions using existing bolts.

Operating the Speed Limiter Kit

Using the Speed Limiter Kit

Understand how the speed limiter kit controls machine speed during use.

Disabling the Speed Limiter Kit

Learn to temporarily deactivate the speed limiter by removing its springs.