Toro 08743 - Controls System Maintenance; Adjusting the Lift Lever

ControlsSystem
Maintenance
AdjustingtheLiftLever
Adjustthedetentplateoftheliftlever(Figure38)if
theattachmentdoesnotoatproperly(followground
contour)duringoperation.
1.Parkthemachineonalevelsurface,shutoffthe
engine,engagetheparkingbrake,andblockthe
wheels.
2.Removethe4screwssecuringthecontrolpanel
totheframe(Figure37).
g002733
Figure37
1.Controlpanel
2.Screws
3.Loosenthe2boltssecuringthedetentplateto
thefenderandtheframe.
g002734
Figure38
1.Detentplate2.Mountingbolts
WARNING
Theenginemustberunningsothatyou
canadjustthedetentplate.Contactwith
movingpartsorhotsurfacesmaycause
personalinjury.
Keepyourhands,feet,face,andother
bodypartsawayfromrotatingparts,the
mufer,andotherhotsurfaces.
4.Starttheengine.
5.Withtheenginerunningandtheliftleverinthe
FLOATposition,slidethedetentplateuntilthelift
cylindercanbeextendedandretractedbyhand.
6.Tightenbothmountingscrewstosecurethe
adjustment.
30