8
Optional Equipment
Drag Mat Model No. 08850
Rake Mounting Kit Model No. 08814
Tooth Rake Kit Model No. 08812
Weeder Kit Model No. 08815
Spring Rake Kit Model No. 08813
Finish Grader Model No. 08867
Spiker Model No. 08856
Front Blade Kit Model No. 08821
Sand Blade 240 Model No. 44900
Cyclone Debris Blower Model No. 08857
Blower Mounting Kit Model No. 08858
Blower Chute Kit Model No. 08860
Prong Rake Attachment Part No. 42-3960
Draw Bar Part No. 92-2330
2 Speed Valve Kit Part No. 95–5834
Deluxe Grammer Seat Model No. 30797
Seat Adapter Plate (30797) Part No. 92–7171
Spark Arrestor Part No. 95-5819
Setup
Note: Determine the left and right sides of the machine from the normal operating position.
Loose Parts
Note: Use this chart as a checklist to ensure that all parts necessary for assembly have been shipped. If any of these parts are
missing, total setup cannot be completed.
Description
Qty. Use
Tire and wheel assembly
Lug nuts
2
8
Installing the wheels
Steering wheel
Roll pin, 1/4 x 2-1/2 in.
1
1
Mounting the steering wheel
Seat
Capscrew, 5/16 x 5/8 in.
1
4
Mounting the seat to the seat plate
Capscrew, 5/16 x 5/8 in.
Locknut, 5/16 in.
2
2
Securing the battery cables to the battery
Capscrew, 1/2 x 1-1/4 in.
Washer, 1/2 in.
4
4
Attaching the implements to the frame
Cylinder pin
Cotter pin
1
2
Attaching the cylinder to the implement
Decal 2 Affix on machine, if desired.
Key
Parts catalog
2
1
Operator’s Manual
Engine Operator’s Manual
1
1
Read before operating the machine.
Note: Specifications and design subject to change without notice.
To Next Page
Loading...
