Toro 20067 - Initial Setup Procedures; Unfolding the Handle; Filling the Engine with Oil

Setup
Important:Removeanddiscardtheprotective
plasticsheetthatcoverstheengine.
1.UnfoldingtheHandle
Procedure
Foldingorunfoldingthehandleimproperlycan
damagethecables,causinganunsafeoperating
condition.
•Donotdamagethecableswhenfoldingor
unfoldingthehandle.
•Ifacableisdamaged,contactanAuthorized
ServiceDealer.
1.Carefullymovetheupperhandleforwarduntilthe
handlehalvesareinlineandnesttogetherasshown
(Figure3).
Figure3
2.Tightenthehandleknobs(Figure4).
Figure4
3.Rotatethehandlerearward(asshown)untilitclicks
intoplace(Figure5).
Figure5
2.FillingtheEnginewithOil
Procedure
Yourmowerdoesnotcomewithoilintheengine,butit
doescomewithabottleofoil.
1.Removethedipstick(Figure6).
Figure6
2.Slowlypouroilintotheoillltubeuntiltheoillevel
reachestheFulllineonthedipstick(Figure6).Do
notoverll.(Max.ll:20oz.(0.59l),type:SAE
6