Toro 20093 - Adjusting the Handle Height

Note:Toraisethemower,moveall4cuttingheight
leversforward;tolowerthemower,movethemall
rearward(Figure12).
Figure12
AdjustingtheHandleHeight
Youmayraiseorlowerthehandletoaposition
comfortableforyou.
Rotatethehandlelock,movethehandletooneofthree
positions,andlockthehandleintoposition(Figure13).
Figure13
1.Handlelock2.Handlepositions
StartingtheEngine
1.PushtheignitiontoggleswitchtotheOn(“I”)
position(Figure14).
Figure14
1.Ignitiontoggleswitch
2.Starttheengineinoneof2ways:
•Pulltherecoilstarterintheoperatingposition
(Figure15).
Figure15
•Pulltherecoilstarterattheengine(Figure16).
Figure16
Note:Ifthemowerdoesnotstart,contactan
AuthorizedServiceDealer.
8