Toro 20955 - Adjusting the Handle Height; Adjusting the Cutting Height

AdjustingtheHandle
Height
Youcanraiseorlowerthehandlein1of2positions
thatismorecomfortableforyou(Figure15).
g032867
Figure15
1.Loosenbothhandleknobsuntilyoucanpush
thesquareedgesofthecarriageboltsoutofthe
squareholesinthehandlebrackets.
2.Pushtheknobsuntiltheyareloose.
3.Movethehandletotheupperorlowerheight
position.
4.Pulltheknobsuntilthesquareedgesofeach
carriagebolttsintoitsrelatedsquarehole.
5.Tightenthehandleknobsastightasyoucan.
AdjustingtheCutting
Height
WARNING
Adjustingthecuttingheightmaybringyou
intocontactwiththemovingblade,causing
seriousinjury.
•Shutofftheengineandwaitforallmoving
partstostop.
•Donotputyourngersunderthehousing
whenadjustingthecuttingheight.
CAUTION
Iftheenginehasbeenrunning,themufer
willbehotandcanseverelyburnyou.
Keepawayfromthehotmufer.
Adjustthecuttingheightasdesired.Setallthewheels
tothesameheight;refertoFigure16.
g027451
Figure16
1.Raisethemachine2.Lowerthemachine
12