Toro 20955 - Setup; Assembling and Unfolding the Handle

Setup
Important:Removeanddiscardtheprotective
plasticsheetthatcoverstheengineandanyother
plasticorwrappingonthemachine.
Important:Topreventaccidentalstarting,
donotinserttheelectric-startbuttonintothe
electric-startignition(ifequipped)untilyouare
readytostarttheengine.
1
AssemblingandUnfolding
theHandle
NoPartsRequired
Procedure
1.Removeandsavethe2handleknobsand2
carriageboltsfromthehandlebrackets(Figure
3).
g032865
Figure3
1.Handleknob(2)2.Carriagebolt(2)
2.Installthehandleendsontothemowerhousing
sothatthepinattachedtoeachhandlebracket
isinthelowerholeofitsrelatedhandleend
(Figure4).
g032866
Figure4
1.Pin2.Handleend
Note:Thepinsdonotshowthroughtheholes
inthehandleendswhenthehandleisinthe
foldedposition.
3.Unfoldthehandletotheoperatingpositionby
rotatingitrearward(Figure5).
g032868
Figure5
1.Operatingposition
2.Foldedposition
4.Insertthecarriagebolt(withtheboltheadtoward
theinside)throughtheupperorlowersquare
holeinhandlebracketandtheupperholeinthe
handleend(Figure6).
6