11
GRAPHIC #
1
Figure 4
1. Location of the bolt and washer.
6. Secure the end of the battery cable to the engine block
using the bolt and washer.
Specifications
Overall width 40.5 inches (103 cm)
Overall length 60.0 inches (152 cm)
Overall height 49.0 inches (125 cm)
Weight (without attachment) 1430 lb (649 kg)
Rated operating capacity (with
200 lb operator and std.
bucket)
515 lb (234 kg)
Tipping capacity (with 200 lb
operator and st. bucket)
l030 lb (467 kg)
Wheelbase 28 inches (71 cm)
Dump height (with std. bucket) 47 inches (120 cm)
Reach—fully raised (with std.
bucket)
26.0 inches (66 cm)
Height to hinge pin (std bucket
in highest position)
66.0 inches (168 cm)
Engine Kohler Command Pro,
20 HP, V–Twin
Specifications and design are subject to change without
notice.
Attachments
Many attachments are available for use with the traction
unit. These attachments allow you to perform many
different functions with the traction unit such as hauling
materials, digging holes, grading, and more. Contact your
Toro dealer for a list of all approved attachments and
accessories.
Important Use only Toro approved attachments.
To Next Page
Loading...
