9
100–9979
1. No fire, open flames, or
smoking.
2. Wear eye protection
3. Keep bystanders a safe
distance from the battery.
4. Caustic liquid/chemical burn
hazard
5. Read the Operator’s Manual.
6. Explosion hazard
7. Contains lead; do not
discard.
8. Recycle
9. Wear eye protection;
explosive gases can cause
blindness and other injuries
10. No sparks, flame, or smoking
11. Sulfuric acid can cause
blindness or severe burns.
12. Flush eyes immediately with
water and get medical help
fast.
Setup
Note: Determine the left and right side of the machine from the normal operating position.
Loose Parts
Note: Use the chart below to verify that all parts have been shipped.
Description Qty. Use
Valve Lever 1 Install valve lever
Key 2 Start engine
Hydraulic oil filter 1 Break-in oil change
Chain link 2 Spare parts
Installing the Valve Lever
1. Thread the lever into the speed selector valve (Fig. 2).
Note: The lever should be installed with the bend toward
the operator.
2. Tighten the jam nut on the lever to lock it in position.
To Next Page
Loading...
