Groundsmaster 4100--D/4110--D Page 7 -- 3 Chassis
Disassembly (Fig. 1)
1. Park machine on a level surface,lowercuttingdeck,
stop engine, engage parking brake and remove key
from the ignition switch.
2. Disassemble steeringtowerasneededusingFigure
1 as a guide.
Assembly (Fig. 1)
1. Assemble steering tower using Figure 1 as a guide.
A. Thrust washers (item24) on steering column are
usedasneededtoremoveendplayofsteeringshaft.
B. If steering wheel was removed, torque hex nut
(item 1) from 16 to 20 ft lb (22 to 27 N--m).
Chassis
To Next Page
Loading...
Need help?
General
