14
Outboard Cutting Units
Type
Two, three spindle, side mounted rotary cutting units each with a 57 in. (145 cm)
width of cut
Trimming Ability
Trims to either side. 58 in. (147 cm) cutting unit offset from outside of wheel to trim
side of side cutting unit on either side
Height-of-Cut Adjustment 1/2 in. (12.7 mm) increments by spacers on all castor shafts
Cutter Drive Hydraulic gear motor. Three “B” section belts to spindles
Castor Wheels Four 10.50 x 3.50 heavy duty, interchangeable, pneumatic castor wheels
Cutting Unit Suspension
Outboard cutting unit arms pivot from center, sweep cutting units forward in mow
and lift, and rotate cutting units down and back in transport. Arms have rubber
mount design for shock absorption and more cutting unit floatation (patented).
Adjustable, spring-loaded, breakaway arms release and rotate outboard cutting unit
upon accidental impact. Automatically reset when cutting unit is raised. Cam lock
links automatically secure outboard cutting units in transport position.
Dimensions
Machine Width (approx.)
Transport: 7 ft. 11 in. (241 cm)
Mow: 16 ft. 3 in. (495 cm)
Machine Height (approx.)
Transport: 7 ft. 7 in. (231 cm) to top of raised cutting units
Mow: 4 ft. 11 in. (152 cm) to top of seat back
Machine Overall Length
(approx.)
14 ft. (427 cm)
Total Weight (with fluids)
(approx.)
6540 lb. (2967 kg)
Optional Equipment
2–Post Roll Over Protection System
Canopy option
Canopy w/ windshield option
Cab with Roll Over Protection System
Road Light Package
8 ft (244 cm) Rotary Broom
Air Conditioning
7 Foot Snow blower
Leaf Mulcher
Cold Start Kit
Foam Filled Castor Tires
Extra Traction Drive Tire
4 Wheel Drive Assist Kit
To Next Page
Loading...
