Toro 30607 - Changing the Rear Axle Lubricant; Checking the Rear Wheel Toe-In

ChangingtheRearAxle
Lubricant
ServiceInterval:Aftertherst200hours
Every800hours
Changetheoilinitiallyaftertherst200hoursof
operationandevery800hoursofoperationthereafter.
1.Positionthemachineonalevelsurface.
2.Cleantheareaaroundthe3drainplugs;1on
eachendand1inthecenter(Figure91).
3.Removethecheckplugstoeaseindrainingof
theoil.
4.Removethedrainplugsandallowtheoiltodrain
intothepans.
g011509
Figure91
1.Drainpluglocation
5.Cleantheareaaroundthedrainplugonthe
bottomofthegearbox(Figure92).
6.Removethedrainplugfromthegearboxand
allowtheoiltodrainintoapan.Removethell
plugtoeaseindrainingoftheoil.
g011558
Figure92
1.Drainplug
7.Addenoughoiltobringtheleveluptothebottom
ofthecheckplugholes;refertoCheckingthe
RearAxleLubricant,andCheckingtheRear
AxleGearBoxLubricant.
8.Installtheplugs.
CheckingtheRearWheel
Toe-In
ServiceInterval:Every800hours
Afterevery800operatinghoursorannually,check
therearwheeltoe-in.
1.Measurethecenter-to-centerdistance(ataxle
height)atthefrontandrearofthesteeringtires.
Thefrontmeasurementmustbe6mm(1/4inch)
lessthantherearmeasurement.
2.Toadjust,loosentheclampsatbothendsofthe
tierods.
3.Rotatethetierodendtomovethefrontofthe
tireinwardoroutward.
4.Tightenthetierodclampswhentheadjustment
iscorrect.
60