Toro 323 - Changing the Hydraulic Fluid; Changing Hydraulic Fluid Procedure; Cleaning; Removing Debris from Machine

ChangingtheHydraulic
Fluid
ServiceInterval:Yearly
1.Parkthemachineonalevelsurface,remove
anyattachment,engagetheparkingbrake(if
equipped),raisetheloaderarms,andinstallthe
cylinderlocks.
2.Shutofftheengineandremovethekey.
3.Removethehood/front-accesscover.
4.Placealargedrainpanunderthemachinethat
canholdatleastthehydraulic-tankcapacity.
5.Removethedrainplugfromthebottomofthe
hydraulictankandallowtheuidtocompletely
drainout.
6.Installthedrainplug.
7.Fillthehydraulictankwithhydraulicuid;refer
toHydraulicFluidSpecications(page32).
Note:Disposeofusedoilatacertiedrecycling
center.
8.Installthehood/front-accesscover.
9.Removeandstorethecylinderlocksandlower
theloaderarms.
Cleaning
RemovingDebris
ServiceInterval:Beforeeachuseordaily
Important:Operatingtheenginewithablocked
grassscreen,dirtyorpluggedcoolingns,and/or
coolingshroudsremovedwillresultinengine
damagefromoverheating.
1.Parkthemachineonalevelsurface,raisethe
loaderarms,andinstallthecylinderlocks.
2.Shutofftheengineandremovethekey.
3.Cleananydebrisfromthegrill.
4.Wipeawaydebrisfromtheaircleaner.
5.Cleananydebrisbuildupontheenginewitha
brushorblower.
Important:Blowthedirtoutratherthan
washitout.Ifyouusewater,keepit
awayfromelectricalitemsandhydraulic
valves.Donotuseahigh-pressurewasher.
High-pressurewashingcandamagethe
electricalsystemandhydraulicvalvesor
depletegrease.
6.Removeandstorethecylinderlocksandlower
theloaderarms.
34