Toro 38066 - Assembly; Loose Parts

8
Tecumseh Part No. 35077
1. Key ignition
2. Engage to start the
engine
3. Disengage to stop the
engine
4. Fast
5. Increasing scale
6. Slow
7. Stop the engine
Tecumseh Part No. 36501
1. Primer
Tecumseh Part No. 37119
1. Warning—hot surface; do not touch
Assembly
Note: Determine the left and right sides of the machine from the normal operating position.
Loose Parts
DESCRIPTION QTY. USE
Handle assembly 1
Bolts 4
Installing the handle assembly
Curved washers 4
gy
Speed selector rod 1
Cotter pin 1
Installing the speed selector rod
Flat washer 1
g
Spring 1
Installing the traction rod
Flange locknut 1
Installing the traction rod
Lower link 1
Flange nut 1 Installing the auger/impeller drive control
linkage
Flange locknut 1
Discharge chute 1
Chute retainers 3
I t lli th di h h t
Chute retainer plates 3
Installing the discharge chute
Screws 3
Locknuts 3