6
Safety and Instruction Decals
Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or lost.
94-2558
1. Cutting/dismemberment in impeller hazard—stay away from
moving parts, stop the engine, and remove the key before
performing maintenance
94-2568
1. Cutting/dismemberment in impeller and auger hazard—keep
bystanders away
94-2575
1. Warning—consult the operator’s manual before performing
maintenance
99-3229
1. Traction drive
2. Squeeze the control handle
to engage
3. Release the control handle
to disengage
4. Warning—read the
Operator’s Manual
5. Warning—Use lower gear
and rear wheel position on
slopes; do not use on steep
slopes
6. Thrown object hazard—keep
bystanders away
7. Cutting/dismemberment in
impeller and auger
hazard—stay away from
moving parts, and stop the
engine and remove the key
before performing
maintenance
8. Warning—stop the engine
before leaving the machine
9. Auger/impeller drive
10. Forward drive speed settings
11. Reverse drive speed
settings
12. Chute direction control
To Next Page
Loading...
