6
3329-770 Rev A
Product Overview
1
2
3
4
5
6
8
12
10
11
9
m-6936
7
1. Auger/impeller lever
2. Speed selector lever
3. Quick Stick discharge
chute control
4. Traction lever
5. Fuel tank
6. Engine oil fill tube/ dipstick
7. Chute deflector
8. Discharge chute
9. Fuel shutoff valve
10. Skid (2)
11. Auger
12. Scraper
1
6
3
4
5
2
1. Ignition switch
2. Choke
3. Throttle
4. Primer
5. Electric starter
6. Recoil starter
Setup
Installing the Upper Handle
Assembly
1. Lift and rotate the upper handle assembly and
position it over the lower handle.
Note: Ensure that the 2 cables attached to the
Quick Stick are routed inside the upper handle
legs and that the 2 lever cables and the wire for
the headlight are not pinched between the handle
sections.
2. Secure the upper handle assembly with 4 handle
bolts, 4 curved spacers, and 4 locknuts from the
loose parts bag.
m-6964
To Next Page
Loading...
