106-4525
Reorder part no. 107-3826
1. Fast
3. Slow
2. Forward speeds 4. Reverse speeds
106-7309
1. Cutting/dismemberment hazard, impeller—stop the engine
before leaving the operating position and do not place your hand
in the chute.
107-3040
1. Cutting dismemberment, impeller and cutting dismemberment,
auger hazards—keep bystanders a safe distance from the
snowthrower.
1. Warning—hot surface, do not touch
Tecumseh Part No. 36501
1. Primer
Tecumseh Part No. 35077
1. Key ignition
5. Increasing scale
2. Engage to start the engine 6. Slow
3. Disengage to stop the engine 7. Stop the engine
4. Fast
5
To Next Page
Loading...
