Toro 44539 - Mounting the Hitch to the Debris Blower; Connecting the Debris Blower to the Tow Vehicle

2
MountingtheHitchtothe
DebrisBlower
Partsneededforthisprocedure:
1Debrisblowerassembly
1Hitch
2
Bolt(3/8x3inches)
2
Flangenut(3/8inch)
Procedure
1.Positionthedebrisbloweronaat,levelsurface.
2.Insertthehitchtubeintotheframebrackets
(
Figure6).Securethetubetotheframewith2bolts
(3/8x3inches)andangenuts(3/8inch).
G020731
1
2
Figure6
1.Framebrackets2.Hitchtube
3.Routethewireharnessalongtherightsideofthe
hitchtube(
Figure7).
G020732
1
2
Figure7
1.Wireharness2.Harnessclips
4.Plugtheharnessclipsintotheholesinthesideof
thehitchtubetosecureit(Figure7).
5.Storetheharnessconnectorinthehitchtubeholster
(Figure8).
3
ConnectingtheDebrisBlower
totheTowVehicle
NoPartsRequired
Procedure
Thistrailerusesacouplerthatrequiresa2inchballfor
thehitch.
1.Raisethetrailertoasuitablehitch.
2.Liftthecouplerleveronthetonguewhilelowering
thecoverovertheballhitch(
Figure8).
10