Toro 44539 - Adjusting the Belt

G017855
1
Figure33
1.Nozzleguides
AdjustingtheBelt
ServiceInterval:Aftertherst8hours
Every50hours
Ifthebeltslipswhenchangingthedirectionofthe
nozzle,anadjustmenttothebeltisrequired.
1.Loosentheboltssecuringthepulleymounting
brackettotheblowerframe(
Figure34).
Figure34
1.Belt3.Mountingbolt
2.Pulley
2.Pivotthepulleymountingbracketawayfromthe
nozzleuntilthedesiredbelttensionattained.
3.Tightenthemountingbolts.
InspectingtheTires
ServiceInterval:Every100hours
Operatingaccidentscandamageatireorrim,soinspect
tireconditionafteranaccident.
Checkthetirepressurefrequentlytoensureproper
ination.Ifthetiresarenotinatedtothecorrect
pressure,thetireswillwearprematurely.
AlwaysreplacewornordamagedtireswithDOT
approvedtires.See
Figure35forthelocationofthetire
identicationnumbers.
Figure35
Figure36isanexampleoftirewearcausedbyunder
ination.
Figure36
1.Underinatedtire
Figure37isanexampleoftirewearcausedbyover
ination.
Figure37
1.Overinatedtire
27