To Next Page
A
Aaron WardAug 25, 2025
Why is my Toro 74388 cutting height uneven?
- JJohn BoydAug 25, 2025
Uneven cutting height with your Toro Lawn Mower can occur for several reasons. Start by sharpening the blade(s) or replacing them if bent. Ensure the mower is level from side to side and front to rear. Check and adjust the anti-scalp wheel height if it's not set correctly. Clean the underside of the mower if it's dirty. Adjust the tire pressure if it's incorrect. If a blade spindle is bent, contact an Authorized Service Dealer.
General
