Toro 74389 - Operating the Blades; Testing the Safety-Interlock System

Note:Whentheenginestarts,releasethekey.
Important:Donotengagethestarterformore
than10secondsatatime.Iftheenginefailsto
start,allowa60secondcool-downperiodbetween
attempts.Failuretofollowtheseinstructionscan
damagethestartermotor.
Figure14
1.Controlpanel
5.Run
2.Ignitionkey—runposition
6.Start
3.Ignitionkey—startposition
7.Chokecontrol
4.Off
5.Aftertheenginestarts,pushdownontheChoke
control(Figure14).
Note:Iftheenginestallsorhesitates,pullupon
theChokecontrol,andlettheenginerunforafew
seconds.Then,pushdownontheChokecontrol.
Repeatthisasrequired.
OperatingtheBlades
Theblade-controlswitch,representedbyapowertake-off
(PTO)symbol,engagesanddisengagespowertothemower
blades.Thisswitchcontrolspowertoanyattachmentsthat
drawpowerfromtheengine,includingthemowerdeckand
cuttingblades.
EngagingtheBlades
Important:Donotengagethebladeswhenparkedin
tallgrass.Beltorclutchdamagecanoccur.
1.Releasepressureonthemotion-controlleversand
placethemachineinneutral.
2.MovethethrottletotheFastposition.
Note:Alwaysengagethebladeswiththethrottlein
theFastposition.
3.Pullupontheblade-controlswitchtomoveittothe
Onposition,andengagetheblades(
Figure15).
Figure15
1.Controlpanel2.Blade-controlswitch—On
position
DisengagingtheBlades
Pushdownontheblade-controlswitchtomoveittotheOff
position,anddisengagetheblades(Figure16).
Figure16
1.Controlpanel2.Blade-controlswitch—Off
TestingtheSafety-interlock
System
Testthesafety-interlocksystembeforeyouusethemachine
eachtime.Ifthesafetysystemdoesnotoperateasdescribed
below,haveanAuthorizedServiceDealerrepairthesafety
systemimmediately.
1.Whilesittingontheseat,withthecontrolleversinpark
position,andmovetheblade-controlswitchtoOn.
2.Trystartingtheengine;theengineshouldnotcrank.
3.Whilesittingontheseat,movetheblade-control
switchtoOff.
18