Toro 74389 - Premaintenance Procedures; Raising the Seat; Lubrication; Greasing the Bearings

Premaintenance
Procedures
RaisingtheSeat
Makesurethatthemotion-controlleversarelockedinthe
parkposition,andlifttheseatforward.
Thefollowingcomponentscanbeaccessedbyraisingtheseat:
•Serialplate
•Servicedecal
•Seat-adjustmentbolts
•Fuellter
•Batteryandbatterycables
Lubrication
GreasingtheBearings
ServiceInterval:Every25hours—Greaseallthelubrication
points.
GreaseType:No.2GeneralPurpose,Lithium-BaseGrease
1.Parkthemachineonalevelsurface,anddisengagethe
blade-controlswitch.
2.Movethemotion-controlleversoutwardtothepark
position,stoptheengine,removethekey,andwaitfor
allmovingpartstostopbeforeleavingtheoperating
position.
3.Cleanthegreasettings(Figure28andFigure29)with
arag.
Note:Makesuretoscrapeanypaintoffofthefront
ofthetting(s).
1
G014522
Figure28
1.Frontcastertire
Figure29
Locatedontheseat-panunderside
1.Readtheinstructions
beforeservicingor
performingmaintenance
3.Greaseevery25operating
hours
2.Checkthetirepressure
every25operatinghours
4.Engine
4.Connectagreaseguntoeachtting(Figure28and
Figure29).
5.Pumpgreaseintothettingsuntilgreasebeginsto
oozeoutofthebearings.
27