Toro 74408 Z334 Z Master - Installing the Battery

Incorrectbatterycableroutingcoulddamage
themachineandcablescausingsparks.Sparks
cancausethebatterygassestoexplode,
resultinginpersonalinjury.
•AlwaysDisconnectthenegative(black)
batterycablebeforedisconnectingthe
positive(red)cable.
•AlwaysReconnectthepositive(red)battery
cablebeforereconnectingthenegative
(black)cable.
1.DisengagethePTO,movethemotioncontrollevers
totheneutrallockedposition,andsettheparking
brake.
2.Stoptheengine,removethekey,andwaitforall
movingpartstostopbeforeleavingtheoperating
position.
3.Unlatchtheseatandtilttheseatup.
4.Firstdisconnectthenegativebatterycableand
groundwirefromthenegative(-)batteryterminal
(Figure36).
5.Slidetheredterminalbootoffthepositive(red)
batteryterminal.Thenremovethepositive(red)
batterycable(Figure36).
Figure36
1.Battery7.J-bolts
2.Positivebatterypost
8.Bolt(1/4x3/4inch)
3.Negativebatterypost
9.Groundwire
4.Terminalboot10.Negativebatterycable
5.Batteryclamp
11.Locknut(1/4inch)
6.Wingnut(1/4inch)
12.Positivebatterycable
6.Removebothwingnuts(1/4inch)securingthe
batteryclamp(Figure36).
7.Removethebattery.
InstallingtheBattery
1.Positionbatteryinthetraywiththeterminalposts
towardtheengine(Figure36).
2.First,installthepositive(red)batterycableto
positive(+)batteryterminal.
3.Theninstallthenegativebatterycableandground
wiretothenegative(-)batteryterminal.
4.Securethecableswith2bolts(1/4x3/4inch),
2washers(1/4inch),and2locknuts(1/4inch)
(Figure36).
5.Slidetheredterminalbootontothepositive(red)
batterypost.
6.SecurebatterywithJ-bolts,holddownclampand
2washers(1/4inch),and2wingnuts(1/4inch)
(Figure36).
31