Toro 74408 Z334 Z Master - Adjusting the Tracking

Figure47
5.Iftheendsofthelevershitagainsteachother,adjust
theleversbyrotatingthemouttotheneutrallocked
positionandcarefullybendthemoutward.Repeat
thisstepasneeded.
AdjustingtheTracking
1.Ifthemachineturnsrightorleftwhenthehandles
arepushedforwardtogether,adjustthestoponthe
sideoppositethatthemachineturns.
2.Loosentheboltlocatedinfrontofthecontrollever.
3.Movethestopuntilthemachinedrivesstraight
(Figure48).
4.Tightentheboltlocatedinfrontofthecontrollever
(Figure48).
Figure48
1.Controllever3.Boltinfrontofthecontrol
lever
2.Stop
37