EasyManua.ls Logo

Toro 74434 - Maintenance; Recommended Maintenance Schedule(s)

Toro 74434
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Maintenance
Note: Deter mine the left and right sides of the mac hine from the nor mal operating position.
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
Maintenance Procedure
After the rst 10
operating hours
Change the engine oil.
Before each use or daily
Test the safety interlock system.
Check the air lter.
Check the engine oil level.
Check the cutting blades.
Wipe clean the collection sensors.
Clean the mower housing.
Every 25 hours
Grease all lubrication points.
Check tire pressure.
Check the belts for wear/cracks.
Every 50 hours
Clean the air lter (more often in dirty or dusty conditions).
Check the battery electrolyte level.
Every 100 hours
Change the engine oil (more often while operating the engine under heavy
load or in high temperatures).
Change the oil lter
Check the spark plug.
Replace fuel lter.
Every 300 hours
Clean the combustion chamber.
Before storage
Drain the fuel tank.
Charge the battery and disconnect battery cables.
Perform all maintenance procedures listed above before storage.
Paint any chipped surfaces.
Yearly or before storage
Clean the cooling system (more often in dirty or dusty conditions).
Change the air lter (more often in dirty or dusty conditions).
Replace spark plug.
Important: R efer to y our engine operator’ s man ual f or additional maintenance pr ocedur es.
If y ou lea v e the k ey in the ignition s witch, someone could accidentl y star t the engine and
seriousl y injur e y ou or other bystander s.
R emo v e the k ey fr om the ignition and disconnect the wir e fr om the spar k plug bef or e y ou do
an y maintenance. Set the wir e aside so that it does not accidentall y contact the spar k plug .
26

Table of Contents

Related product manuals