Toro 74901 - Adjusting the Flow Baffle; Positioning the Flow Baffle

Figure28
1.Anti-scalproller4.FlangeNut
2.Spacer
5.Bolt
3.Bushing
Figure29
1.Anti-scalproller3.FlangeNut
2.Bushing4.Bolt
Figure30
1.Anti-scalproller4.FlangeNut
2.Spacer
5.Bolt
3.Bushing
AdjustingtheFlowBafe
Themowerdischargeowcanbeadjustedfordifferent
typesofmowingconditions.Positionthenutandbafe
togivethebestqualityofcut.
1.DisengagethePTO,movethemotioncontrollevers
totheneutrallockedpositionandsettheparking
brake.
2.Stoptheengine,removethekey,andwaitforall
movingpartstostopbeforeleavingtheoperating
position.
3.Toadjustthebafe,loosenthenut(
Figure31).
4.Adjustthebafeandnutintheslottothedesired
dischargeowandtightenthenut.
g0121 19
1 2
Figure31
1.Slot
2.Nut
PositioningtheFlowBafe
Thefollowingguresareonlyrecommendationsfor
use.Adjustmentswillvarybygrasstype,moisture
content,andheightofgrass.
Note:Iftheenginepowerdrawsdownandthemower
groundspeedisthesame,openupthebafe.
PositionA
Thisisthefullrearposition.Thesuggesteduseforthis
positionisafollows.
•Useforshort,lightgrassmowingconditions.
•Useindryconditions.
•Forsmallergrassclippings.
•Propelsgrassclippingsfartherawayfromthe
mower.
23