Toro 74915 - Maintenance; Recommended Maintenance Schedule(S)

Maintenance
RecommendedMaintenanceSchedule(s)
MaintenanceService
Interval
MaintenanceProcedure
Aftertherst8hours
•Changetheengineoil.
Aftertherst100hours
•Checkthewheellug-nuttorque.
•Checkthewheel-hubslotted-nuttorque.
•Checktheparkingbrakeadjustment.
Aftertherst250hours
•Changethehydraulicltersandhydraulicuidwhenusinganytypeofuid.
Beforeeachuseordaily
•Checkthesafetysystem.
•Checktheengine-oillevel.
•Checktheseatbelt.
•Checktherolloverprotectionsystem(ROPS)knobs.
•Cleantheenginescreenandtheoilcooler.
•Checkandcleanthehydraulic-unitshrouds.
•Inspecttheblades.
•Cleanunderthemowerdeck.
Every50hours
•Greasethemowerdeckspindlesandidlerarm.
•Checkthesparkarrester(ifequipped).
•Checkthetirepressure.
•Inspectthebeltsforcracksandwear.
•Checkthehydraulic-uidlevel.
Every100hours
•Lubricatethemowerdeckliftpivots.
•Changetheengineoil(moreoftenindirtyordustyconditions).
•Checkandcleanengine-coolingnsandshrouds.
Every150hours
•Inspecttheprimarylterandtheair-inletscreen.
Every200hours
•Changetheengine-oillter.
Every250hours
•ChangethehydraulicltersandhydraulicuidwhenusingMobil®1hydraulicuid
(moreoftenindirtyordustyconditions).
Every300hours
•Replacetheprimaryairlter(moreoftenindustyorsandyconditions).
•Checktheinnerairlter.
Every500hours
•Check,cleanandregapthesparkplug.
•Replacethefuellter(moreoftenindirtyordustyconditions).
•Checkthewheellug-nuttorque.
•Checkthewheel-hubslotted-nuttorque.
•Adjustthecaster-pivotbearing.
•Checktheparkingbrakeadjustment.
•ChangethehydraulicltersandhydraulicuidwhenusingToro®HYPR-OIL™500
hydraulicuid(moreoftenindirtyordustyconditions).
Every600hours
•Replacetheinnerairlter.
Monthly
•Checkthebatterycharge.
Yearly
•Greasethepumpbeltidlerarm.
•Greasethefrontcasterpivots(moreoftenindirtyordustyconditions).
•Packthefrontcasterwheelbearings(moreoftenindirtyordustyconditions).
•Lubricatethecaster-wheelhubs.
Yearlyorbeforestorage
•Paintchippedsurfaces.
•Checkallmaintenanceprocedureslistedabovebeforestorage.
Important:Refertoyourengineoperator'smanualforadditionalmaintenanceprocedures.
33