Toro 74915 - Servicing the Fuses

InstallingtheBattery
Note:Positionthebatteryinthetraywiththeterminal
postsoppositefromthehydraulictank(Figure58).
g032526
Figure59
ChargingtheBattery
WARNING
Chargingthebatteryproducesgassesthat
canexplode.
Neversmokenearthebatteryandkeepsparks
andamesawayfrombattery.
Important:Alwayskeepthebatteryfullycharged
(1.265specicgravity).Thisisespecially
importanttopreventbatterydamagewhenthe
temperatureisbelow0°C(32°F).
1.Chargebatteryfor10to15minutesat25to30
Aor30minutesat10A.
2.Whenthebatteryisfullycharged,unplug
thechargerfromtheelectricaloutlet,then
disconnectthechargerleadsfromthebattery
posts(Figure60).
3.Installthebatteryinthemachineandconnect
thebatterycables;refertoInstallingtheBattery
(page46).
Note:Donotrunthemachinewiththebattery
disconnected,electricaldamagemayoccur.
g000960
Figure60
1.Positivebatterypost
3.Red(+)chargerlead
2.Negativebatterypost
4.Black(-)chargerlead
ServicingtheFuses
Theelectricalsystemisprotectedbyfuses.Itrequires
nomaintenance,however,ifafuseblowscheckthe
component/circuitforamalfunctionorshort.
1.Thefusesarelocatedontheconsoletotheright
oftheseat(Figure61).
2.Toreplacethefuses,pulloutonthefuseto
removeit.
3.Installanewfuse(Figure61).
g020464
Figure61
1.Optionalaccessory(15A)4.Main(25A)
2.Charge(25A)5.Console
3.PTO(10A)
46