Toro 74915 - Adjusting the Tracking; Checking the Tire Pressure

g008943
Figure64
1.ROPSknob(locked
position)
3.Rollbarintheupright
position
2.PulltheROPSknobout,
androtateit90degreesto
changetherollbarposition
4.Rollbarinthefolded
position
AdjustingtheTracking
1.Disengagetheblade-controlswitch(PTO).
2.Drivetoanopenatarea,movethe
motion-controlleverstotheNEUTRAL-LOCK
position.
3.Movethethrottlemidwaybetweenfastandslow.
4.Movebothmotion-controlleversalltheway
forwarduntiltheybothhitthestopsintheT-slot.
5.Checkwhichwaythemachinetracks.
•Ifittrackstotheright,loosentheboltsand
adjusttheleftstopplaterearwardonthe
leftT-slotuntilthemachinetracksstraight
(Figure65).
•Ifittrackstotheleft,loosentheboltsand
adjusttherightstopplaterearwardonthe
rightT-slotuntilthemachinetracksstraight
(Figure65).
6.Tightenthestopplate(Figure65).
g027340
Figure65
Leftcontrollevershown
1.Controllever3.Stopplate
2.Bolt
CheckingtheTirePressure
ServiceInterval:Every50hours/Monthly(whichever
comesrst)
Maintaintheairpressureinthefrontandreartiresat
90kPa(13psi).Uneventirepressurecancausean
unevencut.Checkthetireswhentheyarecoldtoget
themostaccuratepressurereading.
49