Toro 74923 - Adjusting the Motion-Control Damper; Adjusting the Motion Control Neutral-Lock Pivot

thelever,allowthereverse-indicatorspringsto
bringtheleversbacktoneutral.
Note:Thewheelsmuststopturningorslightly
creepinreverse.
11.Shutofftheunit,removethejumperwirefrom
thewireharness,andplugtheconnectorinto
theseatswitch.
12.Removethejackstands.
13.Raisethedeckandinstalltheheight-of-cutpin.
14.Checkthatthemachinedoesnotcreepin
neutralwiththeparkbrakesdisengaged.
Adjustingthe
Motion-ControlDamper
Thetopdampermountingboltcanbeadjustedto
obtainamoredesiredmotion-controlleverresistance.
SeeFigure84formountingoptions.
g008620
Figure84
RightControlShown
1.Torquethelocknutto23N∙m(17ft-lb).Theboltmust
protrudepasttheendofthelocknutaftertorquing.
2.Mostresistance(rmestfeel)
3.Damper
4.Mediumresistance(mediumfeel)
5.Leastresistance(softestfeel)
AdjustingtheMotion
ControlNeutral-LockPivot
Theangednutcanbeadjustedtoobtainamore
desiredmotion-controlleverresistancewhenmoving
ittotheNEUTRAL-LOCKposition.SeeFigure85for
adjustmentoptions.
1.Loosenthejamnut.
2.Tightenorloosentheangednuttothedesired
feel.
Note:Formoreresistance,tightentheanged
nut.
Note:Forlessresistance,loosentheanged
nut
3.Tightenthejamnut.
g008621
Figure85
1.Flangednut2.Jamnut
58