Toro 74947 - Adjusting Cutting Height

DrivingBackward
1.Movetheleverstothecenter,unlockedposition.
2.Togobackward,slowlypullthemotion-controllevers
rearward(Figure24).
G008953
Figure24
StoppingtheMachine
Tostopthemachine,movethemotion-controlleversto
neutralandthentotheNEUTRAL-LOCKposition,disengage
theblade-controlswitch(PTO),andturntheignitionkeyto
theOFFposition.
Settheparkingbrakewhenyouleavethemachine;referto
SettingtheParkingBrake(page19).Removethekeyfrom
theignitionswitch.
CAUTION
Childrenorbystandersmaybeinjuredifthey
moveorattempttooperatethemachinewhileitis
unattended.
Alwaysremovetheignitionkeyandsettheparking
brakewhenleavingthemachineunattended,even
ifjustforafewminutes.
AdjustingtheHeight-of-Cut
UsingtheTransportLock
Thetransportlockhas2positions,andisusedwiththe
deck-liftpedal.ThereisaLOCKpositionandanUNLOCK
positionforthetransportpositionofthemowerdeck(Figure
25).
25