Toro 74995 - Adjusting the Tracking

g008943
Figure68
1.ROPSknob(locked
position)
3.Rollbarintheupright
position
2.PulltheROPSknobout,
androtateit90degrees
tochangetherollbar
position.
4.Rollbarinthefolded
position
AdjustingtheTracking
1.Disengagetheblade-controlswitch(PTO).
2.Drivetoanopen,atareaandmovethe
motion-controlleverstotheNEUTRAL-LOCK
position.
3.MovethethrottlemidwaybetweentheFASTand
SLOWpositions.
4.Movebothmotion-controlleversforwarduntil
theybothhitthestopsintheT-slot.
5.Checkwhichwaythemachinetracks.
6.Ifthemachinetrackstotheright,loosenthe
boltsandadjusttheleftstopplaterearwardon
theleftT-slotuntilthemachinetracksstraight
(Figure69).
7.Ifthemachinetrackstotheleft,loosenthebolts
andadjusttherightstopplaterearwardonthe
rightT-slotuntilthemachinetracksstraight
(Figure69).
8.Tightenthestopplate(Figure69).
g029647
Figure69
Leftcontrollevershown
1.Controllever3.Stopplate
2.Bolt
53