Toro 74995 - Cleaning the Engine Cooling Fins and Shrouds; Cleaning the Hydraulic Units

CleaningtheEngine
CoolingFinsandShrouds
ServiceInterval:Every100hours/Yearly(whichever
comesrst)
1.Disengagetheblade-controlswitch(PTO)and
settheparkingbrake.
2.Shutofftheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
3.Removetheairintakescreen,recoilstarter,and
fanhousing(Figure80).
4.Cleanthedebrisandgrassfromtheengine
parts.
5.Installtheair-intakescreen,recoilstarter,and
fanhousing(Figure80).
g004218
Figure80
1.Engineguard4.Fanhousing
2.Engineair-intakescreen
5.Screw
3.Bolt
CleaningtheHydraulic
Units
ServiceInterval:Beforeeachuseordaily
1.Disengagetheblade-controlswitch(PTO)and
settheparkingbrake.
2.Shutofftheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
3.Movetheseatforward.
4.Cleanthedebrisandgrassfromthehydraulic
units(Figure81).
5.Positiontheseat.
g029645
g009920
Figure81
1.Hydraulicunits
58