To Next Page
Q
qwarrenSep 7, 2025
What to do if the clutch does not engage on my Toro Lawn Mower?
- MMatthew LopezSep 7, 2025
If the clutch does not engage on your Toro Lawn Mower, check for a low voltage supply at the clutch, inspecting the coil resistance, battery charge, charging system, and wiring connections, and replace parts if necessary. If the coil is damaged, replace the clutch. An inadequate current supply may also be the issue; repair or replace the clutch lead wire or electrical system and clean the connector contacts. If the rotor/armature air gap is too large, replace the clutch. Finally, a faulty blade control switch (PTO) can prevent clutch engagement, so replace it if necessary.
General
