Operation
15
Attachment
Lift Lever
The attachment lift lever (Fig. 25 & 26) is used to
raise and lower various attachments.
Raising Attachments
1. Start the tractor.
2. Pull the attachment lift lever upward until the
latch locks. In this position, the lift will hold the
attachment in the up, or raised position.
POTENTIAL HAZARD
• When the engine is off, attachments in the
raised position can gradually lower.
WHAT CAN HAPPEN
• Someone nearby may be pinned or injured
by the attachment as it lowers.
HOW TO AV
OID THE HAZARD
• Always lower the attachment each time you
shut off the tractor.
Lowering Attachments
1. Start the tractor.
2. Push the attachment lift lever downward to
lower the attachment.
m–3258
1
Figure 25
1. Attachment
lift lever
m–3315
1
2
Figure
26
1. Raise
attachment
2.
Lower attachment
To Next Page
Loading...
