Troubleshooting
26
PROBLEM
POSSIBLE CAUSES
CORRECTIVE ACTION
PT
O (cutter deck) belt comes of
f
of pulleys,slips or fails. (continued)
8. PT
O is being engaged when
cutter deck is in tall uncut
grass or weeds.
8.
Engage PT
O only in shorter
or previously cut grass.
9.
Cutter deck is overloaded
because too much grass is
being cut at a time.
9.
Cut tall grass and weeds with
mower in its highest position,
making a second pass cutting
at height desired.
10.
Cutter deck is overloaded
because deck is clogged with
grass clippings.
10.
Clean cutter deck.
11.
Cutter deck is overloaded
because tractor is mowing too
fast for conditions.
11.
Reduce ground speed.
To Previous Page
Loading...