What to do if the Toro Dingo 323 Compact Loader traction unit does not drive?
If the traction unit of your Toro Compact Loader does not drive, ensure that the tow-valves are closed. If not, close them. Also, check that the hydro fluid level is not low and add hydro fluid to the reservoir if needed.
General| Horsepower | 23 hp |
|---|---|
| Engine | Kubota Diesel |
| Engine Power | 23 HP (17.2 kW) |
| Operating Weight | 871 kg |
| Tipping Load | 694 kg |
| Hydraulic Flow | 30.7 L/min |
| Width | 104 cm |
| Length | 183 cm |
| Height | 117 cm |
| Tread Width | 33.7 inches |
Guidelines for safe operation and avoiding serious injury or death.
Precautions and best practices for operating on inclines to prevent tip-overs.
Safety measures to protect children from hazards associated with the traction unit.
Visual guide for comparing slopes against a folded edge for safety.
Information on the location and importance of safety decals on the traction unit.
List and verification of all parts shipped with the traction unit.
Step-by-step instructions for installing the speed selector lever.
Procedure for safely charging the traction unit's battery.
Essential checks before starting the engine, including fuel, oil, and area safety.
Overview of the traction unit's main parts and their identification.
Detailed explanation of all control levers, switches, and their functions for safe operation.
Procedures for starting, stopping the engine, and maneuvering the traction unit.
Guidelines for moving non-functioning units and using cylinder locks for maintenance.
Instructions for connecting, removing, and securing attachments.
Procedures for transporting the unit and adjusting the operator's thigh support.
Schedule outlining maintenance tasks based on operating hours.
Procedure for safely removing and reinstalling the traction unit's hood.
Instructions for greasing pivot joints and grease fittings.
Procedure for cleaning and replacing air cleaner filters.
Steps for changing the engine oil and filter.
Process for replacing the traction unit's battery when needed.
Guidance on checking, gapping, and replacing spark plugs.
Procedures for changing hydraulic fluid and replacing the hydraulic filter.
Instructions for replacing the fuel filter and draining fuel tanks.
Steps for cleaning the unit and preparing it for long-term storage.
To Next Page
