Toro Flex-Force Power System MAX - Starting the Chain Saw; Shutting off the Chain Saw

StartingtheChainSaw
1.Ensurethattheventsonthechainsawarefree
fromdustanddebris(Figure7).
g315701
Figure7
1.Sidevent
2.Bottomvent
2.Setthechainsawdownonalevelsurface.
3.Alignthetongueofthebatterypackwiththe
batterycavityinthechainsaw(Figure8).
g315702
Figure8
4.Pushthebatterypackintothebatterycavityuntil
thebatterypacklocksintoplace.
5.Removetheprotectivecoverfromthechain.
6.EnsurethatthechainbrakeisintheOPERATING
position(Figure9).
g315703
Figure9
1.Chainbrake(OPERATING
position)
2.Chainbrake(STOP
position)
7.Withyourlefthandonthefronthandleandyour
righthandontherearhandle,pressthetrigger
lock,thensqueezethetrigger(Figure10).
g315704
Figure10
1.Fronthandle4.Trigger
2.Chainbrake
5.Rearhandle
3.Triggerlock
ShuttingOfftheChainSaw
Toshutoffthechainsaw,releasethetrigger.
Wheneveryouarenotusingthesaworare
transportingthesawtoorfromtheworkarea,move
thechainbraketotheSTOPposition(Figure9)and
removethebatterypack.
11