Toro GrandStand 72523 - Side Discharging or Mulching the Grass; Adjusting the Height-Of-Cut

SideDischargingor
MulchingtheGrass
Thismachinehasahingedgrassdeectorthat
dispersesclippingstothesideanddowntowardthe
turf.
DANGER
Withoutthegrassdeector,dischargecover,
orcompletegrasscatcherassemblymounted
inplace,youandothersareexposedtoblade
contactandthrowndebris.Contactwith
rotatingmowerblade(s)andthrowndebris
causeinjuryordeath.
•Donotremovethegrassdeectorfrom
themachine,becausethegrassdeector
routesmaterialdowntowardtheturf.Ifthe
grassdeectoriseverdamaged,replaceit
immediately.
•Neverputyourhandsorfeetunderthe
machine.
•Nevertrytoclearthedischargeareaor
mowerbladesunlessyoureleasethebail
andthepowertakeoff(PTO)isoff.Rotate
thekeytotheOFFposition.Alsoremove
thekeyanddisconnectthewire(s)from
thesparkplug(s).
AdjustingtheHeight-of-Cut
Theheight-of-cutcanbeadjustedfrom38to127mm
(1-1/2to5inches)in6mm(1/4inch)increments.
Note:Usingaheight-of-cutunder51mm(2inches)
increasesthewearonthemower-deckbelt.Usea
height-of-cutthatisgreaterthan51mm(2inches)
wheneverpossible.
g267253
Figure22
20