Greensmaster Flex 21Page 7 – 2Cutting Unit (Rev. C)
Specifications
REEL CONSTRUCTION: 5–inch (12.7 cm) diameter,
11 carbon steel blades (optional 8 blades) welded to 5
stamped steel spiders.
HEIGHT–OF–CUT RANGE: 1/16 to 19/64 inch (1.6 to
7.5 mm).
WIDTH–OF–CUT: 21 inches (53.3 cm).
CLIP: 0.16 inch (0.41 cm).
BEDKNIFE AND BEDBAR: Single edged high carbon
steel bedknife, hardened to RC 48-54. A cast iron bed-
bar is fastened to the mower.
To Next Page
Loading...
