TORO GM 345 Ford VSG-411 Gas Engine
Notes
_______________________________________________________________________________________________________________
_______________________________________________________________________________________________________________
_______________________________________________________________________________________________________________
_______________________________________________________________________________________________________________
_______________________________________________________________________________________________________________
_______________________________________________________________________________________________________________
_______________________________________________________________________________________________________________
_______________________________________________________________________________________________________________
_______________________________________________________________________________________________________________
19
Review Questions
1. Proper high idle setting is:
a. 2800 ± 50 RPM
b. 3200 ± 100 RPM
c. 3000 ± 25 RPM
d. 1500 ± 100 RPM
2. The final high idle adjustment is made at the
carburetor.
a. True
b. False
3. The recommended compression gauge is:
a. 0 - 100 PSI
b. 0 - 200 PSI
c. 0 - 300 PSI
d. 200 - 400 PSI
4. Normal engine compression is:
a. 100 PSI
b. 205 PSI
c. 185 PSI
d. 415 PSI
5. Adding oil to a cylinder with a bad intake valve
will increase the compression reading of the
cylinder.
a. True
b. False
6. When performing a leakage test, air leaking from
the breather indicates :
a. Leaking intake valve.
b. Leaking exhaust valve.
c. Leaking head gasket.
d. A normal situation
To Next Page
Loading...
