EasyManua.ls Logo

Toro GROUNDSMASTER 325-D - Special Tools;Helpful Hints (Electrical Systems)

Toro GROUNDSMASTER 325-D
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Electrical Systems TORO GM 345 / 325-D
68
Special Tools Helpful Hints
1. Digital volt, ohm meter.
OTC PN. OEM1428 or equivalent
2. Electrical “skin over grease”
OTC PN. TOR50547
1. Interlock switches
Neutral switch closed with traction pedal in
neutral
PTO switch closed with PTO disengaged
Seat switch open with no operator in the seat
2. Unit will start without an operator in the seat, if
the PTO is disengaged and the traction pedal is
in neutral.
3. Unit will run without an operator in the seat, if
the PTO is disengaged and the traction pedal is
in neutral
4. Unit will shut off if operator leaves the seat and
the traction pedal is depressed or PTO is
engaged
5. Interlock switches should be checked daily
6. Interlock switches should be replaced every 2
years or 1500 hrs.

Table of Contents

Other manuals for Toro GROUNDSMASTER 325-D

Related product manuals