Run
Set the dial to the Run position to enable automatic watering of all programmed schedules.
Off
Use this dial position to turn off watering, such as when it is raining or you don’t want
watering. As long as the dial is in the Off position, watering programs will not be activated
automatically. This position is also used to terminate any running programs whether manual
or automatic (allow 3 seconds to turn off). For immediate shut down, turn to Off and push
the – button.
1. Set the dial to the Off position.
2. To return timer to normal Automatic operation, simply return dial to Run position.
Caution: In warm weather you may experience landscape damage if the dial is left
unintentionally in the Off position for extended periods of time. Always return the dial
to Run position if automatic operation is desired.
9
To Next Page
Loading...
