Toro LT2240 - Page 15

3.Locatethepreviouslyremovedcontrolarmandbrackets.
4.SecurethepreviouslyremovedfastenersasshowninFigure21.
5.ApplyLoctite
®
243tothehex-headbolt(7/16x2inches)andtorquethehex-headbolt(7/16x2inches)to
70to75N∙m(52to55ft-lb).
g344019
Figure21
1.Control-armsupport
3.Previouslyremovedwasher5.Previouslyremovedseatbelt
2.Previouslyremovedhex-headbolt
(7/16x2inches)—applyLoctite243to
thisbolt.
4.Previouslyremovedwasher6.Previouslyremovedspacer
6.Securethefrontcontrolarmsupportplatetotheseat(Figure16).
7.Securethepreviouslyremovedhex-headbolt(8x10mm),couplinghexnut(8mm),andwasher(8mm)
atthetopoftheseatarm(Figure19).
8.Installthepreviouslyremovedseatcushion.
15