47
SPRAYING SYSTEM
The MULTI PRO
®
1200 Turf Sprayer is primarily
a dedicated spray application vehicle with
optional Hose Reel, Foam Marker, Sonic Boom,
Respirator, PA 17 spreader, Hand Sprayer, and
Roll Over Protection Structure (ROPS) feature.
Equipped with a positive displacement pump
which has speed proportional to ground speed,
pump flow is automatically adjusted as ground
speed changes. As a result, the application rate
remains constant over a wide speed range. The
system includes a Master Boom Valve, Individual
Boom Valves and a Pressure Control Valve
located on the operator's right console, and a
Neutral Speed Control on the operator's left
console for use with the Hand Sprayer and
during filling and mixing. The Spray System itself
consists of a Diaphragm Spray Pump, a 160
gallon tank, Spray Pro
application monitor and
calibration system, and three Boom sections for
even application of material. This unit is specially
designed to improve the accuracy and uniformity
of spray applications.
1. Learn how to operate the Sprayer and how
to use the controls properly. DO NOT let anyone
operate this equipment without first receiving
thorough instructions.
2. Keep all shields, safety devices, and decals
in place. If a shield, safety device or decal is
malfunctioning, illegible or damaged, repair or
replace it before operating the machine.
3. Chemicals can injure persons, animals, plants,
soils or other property. To eliminate environmental
damage and personal injury:
A. Select the proper chemical for the job.
B. Carefully read the directions printed on
the chemical manufacturer's labels before
handling chemicals. Instructions on chemical
manufacturer's container labels, regarding mixing
proportions, should be read and strictly followed.
C. Keep spray material away from skin. If
spray material comes in contact with body, wash
it off immediately with clean water and detergent.
D. Always wear goggles and other protective
equipment as recommended by the Chemical
Manufacturer.
E. Properly dispose of chemical container
and unused chemicals.
MAINTENANCE:
4. Before servicing or making any adjustments
to the Sprayer:
A. Stop the vehicle and set the parking brake.
B. Shut off the vehicle's engine and remove
the key from ignition.
C. Disengage all power and wait until all
moving parts have stopped.
5. Keep all nuts, bolts, and other fasteners
tightened securely. Replace any shields removed
during servicing or adjustments.
6. To be sure of optimum performance and
safety, always purchase genuine TORO
replacement parts. Accessories made by other
manufacturer's could be dangerous. Altering this
equipment in any other manner may affect the
machine's operation, performance, and durability,
or its use may result in injury or death. Such use
could void the product warranty of The Toro
Company.
To Next Page
Loading...
